2 Wheels Recalls

If the tyre is used beyond service life, tread may deform causing vibration, loss of control, increased fall risk

Bending of the fuel line causing contact with the fuel vapor absorber housing may lead to abrasion, leakage, and increas ...

Due to a defective seal bolt, oil can splash onto the rear tyre while driving, causing the rider to lose control and fal ...

The clutch release lever may not be properly welded to the shaft due to a manufacturing error. This can cause the weld t ...

The inhalation valve may not seal properly and allow moisture or water to enter the high-voltage battery. This can reduc ...

The clutch may malfunction due to the properties of antirust oil used on clutch discs, leading to excessive adhesion and ...

A production fault may cause the jet needle to move out of the screw connection in the steering damper, making steering ...

The rear brake hose, between the ABS control unit and rear brake caliper, can be damaged by heat. This may cause sudden ...

Humidity can penetrate the right-hand combined switch, causing ignition or lighting failures. This increases the risk of ...

Due to corrosion inhibitor reacting with worn friction plate material, a viscous substance may form under heat. This can ...

The bolt and nut on the gearshift arm may come loose, making the gearshift lever inoperable. This can lead to loss of co ...

Irregularities in the cast structure of the brake caliper can cause failure, reducing brake performance and increasing a ...

Irregularities in the cast structure of the brake caliper can cause it to fail. This may reduce service brake performanc ...

Lower yoke of the fork and front fork tube can crack and become damaged causing fall injuries.

Due to an incorrect installation of the high-pressure fuel hose assembly, there is a risk of fuel loss causing environme ...

The switchcube (includes buttons for engine control) is unstable under certain conditions (exposure to brake fluid or hi ...

Insufficient bonded area of left handle grip can cause the grip to loosen. This can result in the rider falling, increas ...

The engine could generate excessive heat, reducing radiator fan performance and cooling, possibly leading to coolant lea ...

Due to fatigue of the rubber band that holds the telematics box, it may fall into the front steering fork, leading to st ...

Due to incorrectly machined threads, the front fork caps may strip and detach from the fork outer tube. Front fork cap d ...

Due to a manufacturing defect, the clutch output cylinders may fail. This increases the risk of an accident.

Due to a manufacturing defect, the clutch output cylinders may fail. This increases the risk of a fall and/or injury.

The material used for the side support is not strong enough. This can cause it to bend under the motorcycle’s weight, ...

The rear brake disc may not have been attached tightly enough. Once the rear brake disc is detached, the risk of acciden ...